Information On The Power Supply For The Telephone - Auerswald COMfortel 3500 Inbetriebnahmeanleitung

Important Information
Receiver
Loudspeakers
Hook switch
Casing
Colours
Dimensions
(W x H x D)
Weight
Ambient temperature
Safety
VoIP codecs

Information on the Power Supply for the Telephone

A wall-mounted power supply type no. S110001/EU/ZIS616V with 40 V and
350 mA (COMfortel 3200) resp. FW7577/EU/40 with 40 V and 350 mA (COM-
fortel 3500) is contained in the scope of delivery. Please note the following spe-
cial features with regard to the power supply of the telephone:
Important: If power is being supplied using Power over Ethernet, the
bridge plug must not be removed from the socket on the bottom of the
telephone, which is labelled with
44
Electret microphone, dynamic receiver, hearing aid-compatible
8 Ohm, Ø 52 mm
Magnetic switch contact
Plastic material
White, black
COMfortel 3200: 275 mm x 128/150/170 mm x 210 mm
COMfortel 3500: 275 mm x 148/170/190 mm x 210 mm
COMfortel Xtension300: 120 mm x 68/90/110 mm x 210 mm
COMfortel 3200: approx. 1100 g
COMfortel 3500: approx. 1200 g
COMfortel Xtension300: approx. 310 g
0° to 40°C
CE
G.711, G.722, iLBC
The power supply for the telephone can either be provided via the deliv-
ered wall-mounted power supply or – if your active network component
(switch or router) supports this – via Power over Ethernet (PoE).
The power supply for telephones with a single key extension module can
be provided via the delivered wall-mounted power supply.
For telephones with two or more key extension modules, either two
power supply units or Power over Ethernet and one power supply are
required.
.
COMfortel 3200/3500 - Firmware Version 1.8B - Setup Guide 04 02/14