Product Description - Dea Net-Com Bedienungsanleitung Und Hinweise

NET-COM
Index
1

Product Description

2
Technical Data
3
Installation and Assembly
4
Electrical Connections
SYMBOLS
The following symbols are used within this manual to indicate potential hazards.
Important safety notice. Failure to follow these instructions may result in serious injury or damage to property. Failure to do so
may result in product malfunction and create a hazardous situation.
Important safety notice. Contact with live parts can result in death or serious injury.
Important information for installing, programming or commissioning the product.
1 PRODUCT DESCRIPTION
NET-COM is a device for local and remote control of control units installed on automation systems for gates, garage doors and barrier gates.
Any other use must be regarded as improper and is strictly forbidden! The manufacturer shall not be liable for damages resulting from
improper use of the product that differs from that stated in this manual.
The two relay outputs can be configured in different ways. The activation command can be given from DEA remotes, from inputs or
programmed time-based commands.
The product allows for managing enabling functions of remotes with time slots, events log and remote control. These functions can be
extended to a device with NETLINK technology connected to the dedicated communication port.
NET-COM can function without remote connectivity. In this mode of use, it is possible to modify the operation of the outputs and the
memory of the receiver remotes in a straightforward way through the DEAinstaller app (requires the connection of the NET-NODE interface).
Advanced variations to the programming (modification of time slots and/or time-based controls of the receiver or NETLINK device connected)
can be completed exclusively from the cloud.deasystem.com website and require the connection of a NET-COM via USB to a PC connected
to the Internet and with DEAconnect software started.
Remote automation
management
Operating instructions and
warnings
5
13 Configuration
6
14 Signalling and diagnostics LED
7
14 Product Disposal
15
NET-COM
18
20
20
13