Product Description; Technical Data - Dea NET230N Bedienungsanleitung Und Hinweise

2 PRODUCT DESCRIPTION

NET230N is a universal control panel for DEA System 1 or 2 230V operators automations with or without encoder.
The main feature of this control board is its ease of confi guration of inputs and outputs according to any needs thus ensuring adapta-
bility to any type of automation. It is therefore easy to set up and exclude all unnecessary functions.
In the case of control units supplied in BOX, the degree of protection is IP 55, if installed correctly.

3 TECHNICAL DATA

Power supply (V)
Fuse F2 (A)
Fuse F1 (A)
Outputs 230V motors
(maximum output current) (W)
Auxiliaries power supply output
Safety devices power supply output
"Warning" output
Electric lock output
230V Flashing light output
24V Flashing light output
Operating temperature range (°C)
Receiver frequency
Transmitters type of coding
Max remote controllers managed
Livi 6NET - Livi 9NET
REV - Gulliver
Livi 902 (R/EN/F)
TYPE 00 TYPE 01
GHOST 100 / 200
LIVI 6NET
LOOK - MAC -
STING - OLI
LIVI 9NET
LIVI 500P
GULLIVER
LIVI 502 (R/EN)
REV
24 V ~
24V
24 V max 100mA (for led fl ashing light) art. LED24AI or open gate warning light/courtesy light
Look - Mac - Sting - Oli
Pass - Stop
TYPE 02
LIVI 902
(R/EN/F)
550PL
230 V ~ ±10% (50/60 Hz)
5A
160mA
2 x 500W (oppure 1 x 600W)
(24V_AUX + 24V_ST = max 200mA)
230 V ~ max 150W
max 1 art. 110 or 24V output max 5W confi gurable
230 V ~ max 40W
-20÷50 °C
433,92 MHz
HCS fi x-code - HCS rolling code - Dip-switch - DART
100
Livi 500 (R/EN)
Ghost 100 - Ghost 200
Livi 502 (R/EN)
LATO 220
TYPE 03 TYPE 04
PASS
LATO 220
STOP
Livi 550PL
*
If you are not using
DEA operators, set the
parameter
type of operator" to the
closer value as family
type and performances
ROCK
TYPE 05
ROCK
"Selection
EN-3