Physiomed DEEP OSCILLATION Personal Gebrauchsanweisung Seite 66

PHYSIOMED ELEKTROMEDIZIN AG
ated by a black dot. The treatment begins, the treatment time elapses and the Control Light <6> is
illuminated.
In the example shown here treatment with two different therapy phases is performed. Perform the
treatment and pay attention to the therapy instructions shown before.
In the case of treatments with more than one phase, therapy parameters are automatically switched
after the end of the first therapy phase. As soon as the time for the last treatment phase has elapsed,
the intensity decreases to zero. You can now perform one more treatment or switch off the device.
If the patient senses discomfort, the therapy duration shall be cut short or even suspended. Proceed in the
following way:
(1) Click the therapy time with the Data Selector <2> so that it is underlined.
(2) Rotate the Data Selector<2> to the left and cut short the therapy time to the desired interval.
(3) Press the Data Selector <2> to confirm the selected therapy time.
Tip
Press the data selector three times quickly to return to the welcome screen or first menu level.
The intensity has to be zero to do so.
20
7 Indications
®
DEEP OSCILLATION Personal