Singer 7108 Gebrauchsanweisung Seite 53

MU TI-STITCH ZIG-ZAG
The multi-stitch zig-zag is an extremely versatile stitch. Use it to mend. join or remforce
without bulk. With this stitch you may attach elastic and stretch lace construct lingerie
and swimsuits and fimsh seams. There are many other useful apphcations for the multi-
stitch zig-zag
Bar Täcks
• Fashion Disc: Multi StitchZ>g-Zag ' 'No 2)
• Pattem Selector db
• Needle Posten J. 1:1
• Stitch Widtb : f J | f <
• Stitch ength 0
• General Purpose Needle Plate
• General Purpose Foot
Ä
Make a test sample, using scraps of your ma ­
terial. and duplicating al) garment thickness.
1. Mark Position for the finished end of beit loop
on the fabric.
• Place beit loop. wrong side up. Straight
stitch with cut end 3 mm (1/8 mch) from
edge of garment. do not stitch beyond
edges of the beit loop. Trim the end close
to the stitching and press.
2. Fold beit loop back on the stitching line and
press
• Set your machine according to the code
above.
• Stitch 3 mm (1 /8 inch) from the fold using
the multi-stitch zig zag stitch.
3. Fold over second part and bar tack.
Mending a Tear
• Trim ragged edges.
• Place underlay on the wrong side of tear for
reinforcement. (Do not baste or pin the under ­
lay. since you will be bringing the edges to-
gether in the next Step).
• Stitch on the right side, bringing the edges of
the tear together. Shorten stitch length at
ends and comers to give extra strength.
• Trim underlay.
51