Singer 7108 Gebrauchsanweisung Seite 43

INGERIE SEAMS
1
When seaming nyton tncot insert a 2045
needle in the machine before you begin to
sew
• Pattern Selector
Needle Positron 11 -1
• Stitch Width
i
• Stitch ength: 1 to 1.5
• General Purpose Needle Plate
• Genera! Purpose Foot
• Straight stitch the seam line on wrong side
of fabric.
• Press both seam allowances in the same
direction.
• From the right side. topstitch with narrow
zig-zag stitching. letting the needle aitemate-
!y enter the seam line and seam thickness.
i Stitch width narrow. stitch length 1 to 1.5).
ZIG-ZAG SEAM FINISHES
• Pattern Selector J
• Needle Positron 11 1
• Stitch Width ; | Ult
• Stitch ength 1 to 3 to suit fabric
• General Purpose Needle Plate
• General Purpose Foot
Method 1 - Trimmed Seam Finish
2
• Adjust stitch width and length to give you
the most .«open« stitch that will secure the
fabric edge; avoid harsh overstitching.
• Stitch near the edge of seam allowance,
and trim seam edges evenly after stitching.
Method 2 - Overedged Seam Finish
• Adiust needle thread tension. stitch width,
and stitch length to suit fabric.
• Trim seam edges evenly.
• Place trimmed seam under the foot and
overedge the seam allowance as illustrated.
41