Auerswald COMpact 5000R Inbetriebnahmeanleitung Seite 52

Important Information
Caution: Unauthorised changes to the device can damage the PBX or
breach security and EMC regulations. If security-relevant radio services are
disturbed, the Federal Network Agency can order decommissioning the
device according to §14, section 6, Electromagnetic Compatibility Act.
Caution: Exceeding (even temporarily) the threshold values indicated in
the technical data can damage or even destroy the PBX.
Caution: Electrostatic charges can destroy sensitive components.
Caution: Mechanical loads and electro-magnetic fields can impair PBX
operation.
Important: A power failure, damaged connection lines/cable sockets or
short-circuits in other devices in the building systems can put the PBX out
of operation.
52
Let a qualified electrician lay all the cables inside the building – including
the cable to the door terminal.
Protect the devices by installing overvoltage protection.
Always have a professional carry out repairs. Please contact your qual-
ified electrician or the manufacturer directly.
The memory card of the PBX contains data which is necessary for the
operation of the PBX. Do not remove, mount, or format the memory
card. The memory card on the CPU module should only be exchanged
in the case of service jobs according to the directives of Auerswald ser-
vice staff.
Note the threshold values indicated in the technical data for voltage,
electricity, performance, ambient temperature and humidity.
Never cover the vent slots of the casing.
Divert electrostatic charges from yourself before touching the circuit
boards with your hands or any tools. To do this, touch a metal object,
preferably earthed, e. g. the earthing terminal of the PBX, the 19" casing
or a computer housing.
Avoid mechanical loads (for example, vibrations).
Avoid proximity to devices that generate electro-magnetic fields or react
sensitively to them (e. g. radio receivers, private mobile radio devices,
amateur radio sets, mobile phones, DECT systems, or similar).
Do not expose the device to direct sunlight.
Protect the device from soiling, excessive dust and condensation.
Note the values for ambient temperature and humidity indicated in the
technical data.
COMpact 5000/R - Firmware Version 6.2 - Setup V01 03/2014