Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE 0113 not being observed
Note:
The operating manual is part of this product. It includes
important instructions for the safe, proper and econom-
ic operation of the product, for avoiding danger, for min-
imising repair costs and downtimes and for increasing
the reliability and extending the service life of the prod-
uct. In addition to the safety instructions in this operat-
ing manual, you must also observe the regulations ap-
plicable to the operation of the product in your country.
Familiarise yourself with all operating and safety in-
structions before using the product. Only operate the
product as described and for the specified areas of ap-
plication. Keep the operating manual in a good place
and hand over all documents when passing the product
on to third parties.
2. Product description (Fig. 1)
1.
Tool receiver
2.
Sliding sleeve
3.
Shaft
4.
Trigger lever
5.
Connection
6.
Handle
7.
Tool attachment
20 | GB
3. Scope of delivery
Item
4. Proper use
Depending on the tool being used, the devices de-
scribed are suitable exclusively for compacting, ram-
ming, scraping, cutting, breaking up, removing, rough-
ing, exposing, cleaning, digging or loosening different
materials. Any other use is not in compliance with the
proper intended use and as such is forbidden. Altera-
tions, use of third-party tools or tampering with or alter-
ing controls or actuators is likewise forbidden. Use in
potentially explosive areas is forbidden. Working in or
under water is not permitted.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about
potential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the product.
The product may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications
of the manufacturer, as well as the dimensions speci-
fied in the technical data, must be observed.
Please note that our products were not designed with
the intention of use for commercial or industrial purpos-
es. We assume no guarantee if the product is used in
commercial or industrial applications, or for equivalent
work.
www.scheppach.com
Quantity
Designation
1x
Scraper
1x
Spade
1x
Pointed chisel
1x
Flat chisel
1x
Sliver pass chisel
1x
Compressed air universal tool
1x
Operating manual
Werbung
