Charging Problems - Handicare 1100 Kundendienstanleitung

F
!
Check that the charger is unplugged
before reinstalling the power pack.
Controleer of de oplader is ontkoppeld
voordat u de unit weer installeert.
Compruebe si el cargador está
desenchufado antes de volver a
instalar la unidad motriz.
Vergewissern Sie sich, dass das Lade-
gerät vom Netz getrennt ist, bevor Sie
die Fahreinheit wieder montieren.
Veillez à ce que le chargeur soit
débranché avant de réinstaller le bloc
moteur.
Veri care che il caricatore sia scollegato
prima di reinstallare il blocco motore.

CHARGING PROBLEMS

CHECK !
1
CHARGING CONTACTS PROBLEMS
2
THE PCB IS NOT FITTING WELL/
STICKING IN HIS BRACKETS
3
OVERRUNNING: LIFT STOPS
BECAUSE UNIT CAP IS HITTING
THE ENDSTOP
4
CORROSION ON THE CHARGING
SURFACES
5
POLLUTION ON THE CHARGING
SURFACES
REPAIR
CONTROLBOX MODEL
BEFORE JULY 2023
ASK HANDICARE FOR A NEW
CONTROL BOX
STRAIGHTEN THE BRACKETS OF
THE PCB BY BENDING THEM A BIT
CLEAN THE CHARGING SURFACES
WITH A SCOTCH-BRITE HANDPAD
CLEAN THE STRIP WITH A TISSUE
WITH A DEGREASING LIQUID
(USE KIT AA23773)
SERVICE MANUAL 65