Herunterladen Diese Seite drucken

Handicare 1100 Kundendienstanleitung Seite 22

Vorschau ausblenden Andere Handbücher für 1100:
CERTIFICATE FOR PERIODIC EXAMINATION HANDICARE 1100
Name:
Adress:
Zipcode:
City:
Telephonenumber:
E-mail:
Rail Type:
1100
Type chair:
Manual seat / Powered seat
Options:
Non / Powered footrest / Powered swivel
Rail:
Standard / Slide / Hinge
0. START
Meet customer and ask for his remarks about the lift
0.0
Do a test ride under load and check if the lift is functioning okay
0.1
Remove the key from the switch
0.2
1. STANDARD RAIL
Check the rail for damages
1.0
Clean the rail for dirt
1.1
Check the grooves for damages/irregularities
1.2
Check all fixings of the rail
1.3
Check if all rail parts are aligned
1.4
1.5
Check the fixings of the supports on the stairs
1.6
Check the fixings of the supports on the rail
1.7
Check if the fixation of the supports are still tight
Check the presence of both final limit cams and mechanical endstops
1.8
Check the charger output to rail
1.9
Clean the rail caps for dirt
1.10
2. CHARGER
Check the function of the charger
2.0
Check the wiring for damages
2.1
Check the connection to the charging strip
2.2
Check that the charger does not make noise
2.3
Check that the plug is in the socket and the safety label is placed.
2.4
3. REMOTES
Replace the batteries in the remotes (Penlight AA)
3.0
Check remotes for damages
3.1
Check if the light in the remotes illuminates.
3.2
3.3
Check if the remotes are fitted correctly to the wall
Check the function of all remotes
3.4
For examination of this section the chair and the covers of the unit should be removed and the unit should to be taken of the rail
4. BATTERIES
Check batteries for damages and corrosion on the connections
4.0
Check wiring battery-connections for damages
4.1
Check fuseholder for corrosion
4.2
Check if the display shows a "2" (and the lift will beep) when not charging, and shows a "-" when charging
4.3
Check the capacity of the batteries with a battery tester (battery 1=........ , battery 2=..........)
4.4
Check the charge voltage from the PCB to the batteries
4.5
20 SERVICE MANUAL
UK CERTIFICATE
Additional details:
Projectnumber:
Unitnumber:
Printnumber:
Year:
loading