8. OPTIONS > POWERED FOOTREST
Check that the button of the powered footrest is functioning
8.0
Check that the footrest (un)folds smoothly
8.1
Check the gear and rack segment of the folding mechanism for wear
8.2
Check the spring for damage
8.3
Check the sound of the motor (replace when the noise is too much)
8.4
Check the folding mechanism for damage
8.5
Check that the footrest is not functioning if the emergency button is pressed or the keyswitch is off.
8.6
Check that the safety is functioning (when the footrest is (un)folding, it must stop when blocked)
8.7
Check that the bolts of the motorframes are still fixed
8.8
9. OPTIONS > AUTOSWIVEL
Check the function of the autoswivel
9.0
Check the function of the release button
9.1
Check that the autoswivel is not functioning if the emergency button is pressed or the keyswitch is off
9.2
Check the resistance of the autoswivel
9.3
10. OPTIONS > EASY HINGE
Check the joint
10.0
Clean all parts of the hinge and check the function of the magnet
10.1
Check the charger output to the hinged rail part
10.2
Check the collision bracket (on wear and thightness and straightness)
10.3
Check that the safety is functioning (the lift must stop when it hits the hinged rail)
10.4
11. OPTIONS > SLIDE TRACK
Check the function of the Slide Track
11.0
Check that the safety edges(top and bottom) are functioning (the track must stop when it hits something)
11.1
Check that the track stops at the right position (top and bottom). Adjust the magnet positions if necessary.
11.2
Lubricate the underside of the Slide Track rail near the bottom foot (described in the installation manual)
11.3
Check that the safety edges (top and bottom) are intact and securely fitted to the ends of the rail.
11.4
Check that all roller foot covers are present and are securely fitted to the roller feet.
11.5
Check that warning labels are intact and securely fitted to the first and last roller foot covers.
11.6
11.7
Check if the gas strut is leaking (significant amount of oil in the area of the first (fixed) mounting foot).
Check that the battery box is intact and securely fitted to the mounting bracket
11.8
12. FINISH
Check that all removed parts are reinstalled properly
12.0
Make again a test ride and check if all functions are still okay
12.1
12.2
Complete all necessary documents
12.3
Check that all appropriate labels are present and visible
12.4
Thank the customer for their time and mention to them that they can call the dealer if there are any problems
The stairlift is safe / unsafe
What repairs, renewals or alterations are required to enable the stairlift
to continue to be used safely?
State specified time limit for these repairs:
Signature Handicare lifts employee:
DEALER IS RESPONSIBLE FOR STORAGE (AT LEAST 5 YEARS) OF THIS CERTIFICATE [FILLED IN AND SIGNED WHEN TESTED]
22 SERVICE MANUAL
Remarks
Date of examination:
Signature customer: