Sartorius Entris II Advanced Line Serie Betriebsanleitung Seite 7

1 About this Manual
1.1 Scope
These instructions are part of the device. These
instructions apply to the device in the following versions:
Device
Entris BCA analytical
®
balance with manual
analytical draft shield,
readability of 0.1 mg
Entris BCA precision
®
balance with manual
analytical draft shield,
readability of 1 mg
1) Country-specific marking in model, x =
S Standard balances without country-specific
additions
SAR Standard balances with country-specific
additions for Argentina
SJP Standard balances with country-specific
additions for Japan
SKR Standard balances with country-specific
additions for South Korea
OBR Balances with approval for Brazil
OIN Balances with approval for India
OJP Balances with approval for Japan
ORU Balances with approval for Russia
OCN Balances with approval for China
CEU Conformity-assessed balances with EU type
examination certificate without country-
specific additions
CFR Conformity-assessed balances with EU type
examination certificate only for France
2) Model-typical marking in model
I-1x Devices with internal calibration and
adjustment function
Model
1) 2)
BCA64-1x | BCA64I-1x |
BCA124-1x | BCA124I-1x |
BCA224-1x | BCA224I-1x |
BCA324I-1x
BCA223-1x | BCA223I-1x |
BCA323-1x | BCA323I-1x |
BCA423-1x | BCA423I-1x |
BCA623-1x | BCA623I-1x |
BCA1203I-1x
1.2 Other Applicable Documents
In addition to these instructions, please observe the
following documents: Installation instructions for the
accessories, e.g. printer
1.3 Target Groups
These instructions are written for the following target
groups. The target groups must have acquired the
knowledge indicated below.
Target Group Knowledge and Qualifications
User The user is familiar with the operation
of the device and the associated work
processes. The user knows the dangers
that can occur when working with the
device and can avoid these dangers.
The user has been trained in the
operation of the device.
Operator The operator of the device is
responsible for ensuring compliance
with workplace health and safety
regulations.
The operator must ensure that all
persons who work with the device have
access to the relevant information and
are trained in working with the device.
Entris II Advanced Line Operating Instructions
®
About this Manual
7