Sartorius Entris II Advanced Line Serie Betriebsanleitung Seite 32

Operating Concept
Parameters of the "Statistics" Application
Parameters Settings
Print On*
component
Off
Automatic On
tare
Off*
* Factory setting
Parameters of the "Density" Application
Parameters Settings
Density of
liquid
Accuracy 0-0,000
* Factory setting
Parameters of the "Percent" Application
Parameters Settings
Reference
Accuracy 0-0,000
* Factory setting
Parameters of the "Conversion" Application
Parameters Settings
Factor
Accuracy 0-0,000
* Factory setting
Parameters of the "Animal Weighing" Application
Parameters Settings
Measurements
* Factory setting
32 Entris II Advanced Line Operating Instructions
®
Explanation
Activates the component printout.
Deactivates the component printout.
Activates automatic taring after the components are saved.
Deactivates automatic taring after the components are saved.
Explanation
Defines the density of the buoyancy liquid, e.g., distilled water:
− 0.9982 g/cm at 20°C
3
− 0.9980 g/cm at 21°C
3
− 0.9978 g/cm at 22°C
3
Defines the number of decimal places.
Explanation
Defines the reference percentage.
Defines the number of decimal places.
Explanation
Defines a factor by which the weight value is multiplied.
Defines the number of decimal places.
Explanation
Defines the number of measurements.