Sartorius Entris II Advanced Line Serie Betriebsanleitung Seite 26

Operating Concept
4.11.8 Parameters in the "Settings / Printout / Automatic Print" Menu
Parameters Settings
Auto print Standard
interval
Interval time*
Interval time
Auto print Value*
format
Date, Value
* Factory setting
4.11.9 Parameters in the "Settings / Printout / ID" Menu
Parameters Settings
Set device ID
Set additional
ID
Batch ID On
function
Off*
Batch ID2 On
function
Off*
Sample ID On
function
Autom.
increment
Autom.
decrement
Off*
Sample ID2 On
function
Autom.
increment
Autom.
decrement
Off*
* Factory setting
26 Entris II Advanced Line Operating Instructions
®
Explanation
Model-specific output rate for weight determination < 1 s.
The interval time is used as the output rate.
Defines the interval time.
Prints the weight value.
Prints the weight value and a time stamp.
Explanation
Defines an ID number for the device.
Sets an additional ID number for the device.
Activates the output of the batch ID number in the ISO / GLP printout.
Deactivates the output of the batch ID number in the ISO / GLP printout.
Activates the output of the batch ID2 number in the ISO / GLP printout.
Deactivates the output of the batch ID2 number in the ISO / GLP printout.
− Activates the sample ID.
− The sample ID is queried before each printout.
Counts up the sample ID automatically.
Counts down the sample ID automatically.
Deactivates the sample ID.
− Activates the sample ID2.
− The sample ID is queried before each printout.
Counts up the sample ID2 automatically.
Counts down the sample ID2 automatically.
Deactivates the sample ID2.