Sartorius Entris II Advanced Line Serie Betriebsanleitung Seite 24

Operating Concept
Parameters Settings
Stability High
signal accuracy
Medium
accuracy*
Fast
* Factory setting
4.11.5 Parameters in the "Settings / Weighing / Zero/Tare" Menu
Parameters Settings
Zero / tare Without
function stability
With
stability*
Automatic On*
zero
Off
Zero / tare at On*
power on
Off
SQmin On*
Off
* Factory setting
24 Entris II Advanced Line Operating Instructions
®
Explanation
Explanation
The function of the [Zero] or [Tare] button is executed immediately once the
button is pressed.
The function of the [Zero] or [Tare] button is executed if stability exists when the
button is pressed.
Activates automatic zeroing. The display is automatically set to zero in case of a
deviation of 0 less than (X).
Deactivates automatic zeroing. Zeroing must be triggered with the [Zero]
button.
Activates the initial taring / zeroing. The device is tared or zeroed after it is
switched on.
Deactivates the initial taring / zeroing. After it is switched on, the device shows
the same value as before it was last switched off.
Activates the SQmin application.
Deactivates the SQmin application.