Sartorius Entris II Advanced Line Serie Betriebsanleitung Seite 36

Installation
5 Installation
5.1 Scope of Delivery
Item
Device
Weighing pan
Shield disk (only analytical balance)
Pan support
Power supply unit with country-specific
adapters
Analytical draft shield
Dust cover
Operating Instructions
5.2 Selecting an Installation Site
Procedure
Make sure that the following conditions are met at
t
the installation site:
Condition Characteristics
Ambient conditions Suitability tested (for
ambient conditions, see
Chapter "14.1 Ambient
Conditions", page 49)
Setup surface − Stable, even surface with
− Sufficient space for the
− Sufficient load-bearing
Access to operation- Convenient and safe
relevant parts
36 Entris II Advanced Line Operating Instructions
®
Quantity
1
1
1
1
1
1
1
1
little vibration
device (for device space
requirements, see Chapter
"14.10 Device Dimensions",
page 52)
capacity for the device and
peripheral devices, even
when full (for device weight,
see Chapter "14.11 Gross
Weight", page 52)
5.3 Unpacking the Device
Procedure
Unpack the device.
t
NOTICE Danger of damage to the device from
t
improper handling! Do not lift the device by the draft
shield. Only lift the device by its base.
Install the device at the intended installation site.
t
We recommend keeping the original packaging to
t
return the device securely and appropriately, e.g. for
repairs.
5.4 Installing the Weighing Pan
and Associated Components
Procedure
5.5 Acclimatizing
When a cold device is brought into a warmer area: The
temperature difference can lead to condensation of
humidity in the device (moisture formation). Moisture in
the device can lead to malfunctions.
Procedure
Allow the device to acclimatize for approx. 2 hours at
t
the installation site. Ensure that the device is discon-
nected from the power supply during that time.
Fully open the side
t
panel of the analytical
draft shield.
If an analytical balance
t
is used: Install the
shield disk, the pan
support, and the
weighing pan.
If a precision balance
t
is used: Install the pan
support and the
weighing pan.