Sartorius Entris II Advanced Line Serie Betriebsanleitung Seite 20

Operating Concept
Level 1 Level 2
Printout Printout
Manual print
Automatic print
IDs
SBI protocol SBI function
Manual print format
Automatic print
Connections PC-USB
USB
RS232
20 Entris II Advanced Line Operating Instructions
®
Level 3 Description
ISO / GLP printout Only active if "Manual with stability" or
"Manual without stability" is selected in
Tare after print
"Printout".
Manual print format
Auto print interval Only active if "Printout", "Autom. with
stability" or "Autom. without stability" is
Interval time
selected in "Printout".
Auto print format
Set device ID Only active if ISO / GLP printout is
activated.
Set additional ID
Batch ID function
Batch ID2 function
Sample ID function
Sample ID2 function
Only active if "Manual with stability" or
"Manual without stability" is selected in
"SBI function".
Autom. print cancel Only active if "Autom. with stability" or
"Autom. without stability" is selected in
Auto print interval
"SBI function".
Interval time
Autom. print format
Device used
Device / Protocol Only active if a PC is connected.
Spreadsheet Only active if "PC spreadsheet" is
selected under "PC USB / device/
protocol".
Device used
Device / Protocol The submenu depends on the device or
storage medium connected.
RS232 configuration Only active if "SBI" or "xBPI" is selected
under "USB / device/protocol".
Device / Protocol
RS232 configuration Only active if "SBI" or "xBPI" is selected
under "RS232 / device/protocol".
Foot switch function