Mark PinTherm Infra Connect Technisches Handbuch Seite 9

5.4 Activating the user menu
MON 08:01
DAY
Default setting Menu
You can change the following settings on the menu:
– Switching times
– Day and night-time temperature
– Time/date
– Vacation setting
– Menu code
– Language selection
– Calibration
– Min. activation time
– High/low setting
– Modulating control
– Modbus settings
– IP settings
5.5 Location
This menu displays the name of the specific "Location" that is being controlled (max. 16
characters). The name of a "Location" can only be set via Ethernet (see 5.19), Modbus (see 5.16)
or via the Cloud (see chapter 6).
°C
code
1000
LOCATION
select
ENTER MENU CODE
0000
changes the flashing
digit
to go one digit up
SET/CHANGE
PROGRAM
make your menu choice
with these buttons
leave the menu and go back
ESC
to the main screen
OK
back to
the menu
OK
9
EN