Scheppach UMF1550 Original Bedienungsanleitung Seite 15

9.1 Cleaning
• Keep the universal machine stand as free of dust
and dirt as possible. Rub the universal machine
stand clean with a clean cloth or blow it off with com-
pressed air at low pressure.
• We recommend that you clean the universal ma-
chine stand immediately after every use.
• Clean the device at regular intervals using a damp
cloth and a little soft soap. Do not use any cleaning
products or solvents - they could attack the plastic
parts of the universal machine stand.
9.2 Storage
m Attention!
Store the universal machine stand only in dry locations
that are inaccessible for unauthorised persons.
Spare parts and accessories can be obtained from our
service centre. To do this, scan the QR code on the
cover page.
10. Disposal and recycling
Notes for packaging
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
11. Transport
m Attention!
Do not transport whilst the electric power tool is run-
ning.
Before transporting the universal machine stand, pull
out the mains plug of the electric power tool mounted
on it! Risk of injury due to electric shock and unexpect-
ed start-up of the electric power tool!
Two people can lift the universal machine stand by
its frame bed in order to move the universal machine
stand within rooms (do not drag it along the ground).
If being transported in a vehicle, remove the electric
power tool first.
Fold up the legs for transport.
Ensure that the load is well secured if transporting the
universal machine stand in a motor vehicle.
www.scheppach.com GB | 15