Endress+Hauser alpha-log Betriebsanleitung Seite 69

Display Display
Operating Operating
elements elements
Power Power
supply supplies/
Primary fuses
Safety
Housing Model/ weight Stainless steel V2A, for panel mounting (2... 40 mm),
Front door
Operational
angle
Connections
Technical alterations reserved
Dual display concept:
Scale display and 2x16 character digital LC display
Scales: 91 exchangeable adhesive scales (printed
and neutral) and 186 engineering units; neutral
scales, writable
LC display: Text indication
Operating languages: Selectable dependent on type
of unit.
Dual set up: Selectable operation from the unit front
by either 6 operating push buttons in dialogue with
the integrated display, or unit setting up using PC
software ReadWin via front mounted serial RS232
interface.
Remote setting up using option "Digital I/O" via rear
panel mounted serial RS485 system interface
Normal voltage supply (Fuse: 500 mA, slow blow):
AC 90...253V / 50/60 Hz, max. 15 VA
AC
Low voltage supply (Fuse: 1,6 A slow blow):
18...30 V / 50/60 Hz, max. 15 VA
DC/AC
IEC 1010-1 / EN 61010
Front bezel: 144x144 mm,
Installation depth: 215 mm.
Fixed with two jack screws (delivered).
Total weight: 4 kg
Metal frame with rubber gasket, protection class
IP 54 to IEC 529 / EN 60029, glass viewing window
90° +/- 10° without limitation
90° +/- 30° with limitation on recording
Keyed screw plug in terminal strips,
Wire cross section max. 2.5 mm
6 Technical data
2
67