Endress+Hauser alpha-log Betriebsanleitung Seite 58

4 Handling in operation
4. Handling in operation
4.1 Display of measured values / additional information
Your new recorder has a dual display concept combining the advantages of
analogue scaled displays and digital text display.
In normal operation select the required channel by operating the
button:
0x0 Instantaneous value display of
channel x (x=1..6, dependent
on number of channels in the
recorder)
070 Instantaneous value display of
all active channels
080 Digital pointer value (only on
dotting recorder)
081 Rest paper length
("Paper length counter")
090 Software version
091 Software option code
092 Unit code
56
Permanent display including
measurement point identifier and preset
engineeing units (eg. °C, bar,...)
Scrolled display including measurement
point identifier and preset engineeing
units (eg. °C, bar,...)
Digital display of the channel that can
be seen on the scale from the print
head. Only up to a feed rate of 300
mm/h, otherwise display as in address
070.
How much paper reserve is available
(Condition for this is that the input in
address 120 "Paper length" and reset
on return of paper, see "4.3 Changing
paper and pens").
Service information (please always
transmit when questions arise)
Service information (please always
transmit when questions arise)
Service information (please always
transmit when questions arise)
push