Endress+Hauser alpha-log Betriebsanleitung Seite 43

3.6 Changing scales
1.Select the scale required from the adhesive scale
sheet. In the delivery there are always 2 sheets per
channel.
Tip: For special ranges you can use the neutral blank
scales and write the required ranges on these.
2.Stick the required engineering units onto the scale.
3.Remove the scale carrier from its retainer (bend
slightly from the middle).
4.Remove the scale from the sheet and stick it onto the
scale carrier.
5.Return the scale carrier to its retainer.
Placing scales onto the scale carrier
3.7 Display / push button functions
Unit operation is possible with the works settings
(operating code 0000). You can however set up your
own 4 digit security code (see chapter "Basic settings").
This code must always be entered when parameters
are to be changed using the front panel push buttons.
The code protects against accidental or intentional
manipulation.
3 Installation/connection/setting up
41