Endress+Hauser alpha-log Betriebsanleitung Seite 38

1 Contents/General
36
Contents
1. General
- Transport damage
- The correct unit
- Complete delivery
2. Correct use and safety notes
3. Installation/connection/setting up
- Mechanical installation
- Ambient conditions
- Connection hint
- Connections terminal layout
- Changing scales
- Operating/setting up/interface
- Unit settings/operating parameters
4. Handling in operation
- Measured value display/additional information
- Removing used paper/
push button paper wind up
- Changing paper/pens/printhead
5. Faults and cures
6. Technical data
7. Accessories / consumables
1. General
Transport damage
Please inform both the shipping agent and your
supplier
The correct unit
Please compare the order code on the legend plate (on
the unit) with that on the delivery note.
Complete delivery of accessories
In addition to the unit (with plug in screw terminal blocks
for power and signal connection) the following should
be contained in the delivery:
- 1 x 58 m paper roll (fitted in the unit)
- 2 x jack screws for panel mounting
- Delivery note
Dependent on the model:
- 1 (2) (3) (4) x colour pen(s) or 1 x colour print head
- 1 (2) (3) (4) x sets of adhesive scale/engineering unit
sheets
Please inform your supplier immediately if anything
is missing.
Page
35
37
38
38
39
39
40
41
41
50
56
56
57
57
57
61
64
68