LR-Cal PYROS 140-1L Bedienungsanleitung Seite 57

• Press key (Func�on) to select the func�on F
Use the keys and
▼
and ac�vate the process.
• The icon
(Chapter 7.2).
• The thermostat's release values are recorded in the parameters
Refer to the procedure explained in chapter 7.2.
• The temperature runs between T.
The SON and SOFF
• To stop the switch test, enter
6.4 Serial communica�on RS232
On the front of the calibrator there is a 9-pole socket (11), connected to the
thermo-regulator, which enables the calibrator to be completely controlled
by a PC by the RS232 input. Communica�on protocol see chapter 12.
The external PC must be conform to IEC950 standard.
A�er switching on the calibrator and connec�ng the serial cable, wait
the end of the start-up procedure and press bu�on to ac�vate the
serial communica�on.
DRUCK & TEMPERATUR Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 •
LR-
LR-
to enter RUN ON =
▲
indicates that the process is ac�ve.
max
values are con�nuously updated during every run.
RUN OFF =
DT
Cal PYROS 140-1L + LR-
Cal PYROS 375-DNV +
RUN .
and T. min , un�l the func�on is switched off.
.
E
-Info@Leitenberger.de • www.druck-temperatur.de
57
Cal PYROS 140-2L
LR- Cal PYROS 650-DNV
SON and SOFF .
frontal view
MANUAL