Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LR-
Cal
MANUAL
LR-
Cal
Advises:
• The greater the difference in diameter between the test specimen sensor and the
hole in the insert sleeve, the more �me is required to reach the temperature
setpoint in a stable manner.
• An insert sleeve may only be inserted and removed when the metal block has
reached ambient temperature. Never insert an insert into a heated (or cooled down)
block. The thermal shockcan lead to instability or breakage of the sleeve.
• Do you have test specimens with very special dimensions or shapes? Contact us at
dt-export@leitenberger.de or Tel. +49-7121-90920-0
Always cool (or heat) the calibrator to ambient temperature before switching it off!
6. Opera�on procedure
A more detailed descrip�on of the func�ons, the se�ngs menu and the commands
can be found in chapter 7.
6.1 Descrip�ons
6.1.1 Thermoregulator
The thermoregulator (6) is a PID microprocessor.
LCD-DISPLAY:
Display of the temperature measured inside the block and the setpoint, also
display of configura�on parameters.
Keys
and
:
Increasing or decreasing numerical parameters. The speed of increasing or
▲
▼
decreasing is propor�onal to the �me the bu�on is held down.
Key :
F
Enables access to various parameters at menu level.
Key :
E
Confirms an input ("Enter").
6.1.2 Display symbols
Indicates ac�ve hea�ng
Indicates ac�ve cooling
Displays the status of a connected switch/thermostat
Indicates that a stable temperature has been reached
Indicates ac�ve ramp func�on ("RUN")
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 •
PYROS 140-1L +
LR-
Cal
PYROS 375-DNV +
LR-
Cal
DRUCK
&
TEMPERATUR
Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
PYROS 140-2L
PYROS 650-DNV
DT
-Info@Leitenberger.de •
50
www.druck-temperatur.de
Werbung
