ITEMS
REQUIRED
ERFORDERLICHES ZUBEHÖR
OUTILLAGE
NECESSAIRE
ESC (FETTY')
'J\NESC
(FETTY')
Suitable
servo
Sizo
Grosse
der Servos
Dimensions
max
des
servos
39ev41m
20.5mu-F
Less than 20.5mm
Use standard
size servo. Small size servo cannot be installed.
*Servos
in Standardgröße verwenden. Kleinere Servos können
nicht eingebaut werden.
*Utiliser un servo de taille standard. Un mini-servo ne pout pas
Ötre installé.
RADIO
CONTROL
UNIT
Standard 2 channel R/C unit plus electronic speed
controller is suggested
for this model (combination
small size receiver,
electronic
standard size servo is recommended).
*Read
and follow instructions supplied with R/C unit.
POWER
SOURCE
This kit is designed to use a Tamiya 7.2V battery. Charge
battery according to manual supplied with battery.
FERNSTEUER-EINHEIT
Für dieses
Modell
Wird eine Obliche
elektronischen
Fahrregler vorgeschlagen (eine Kombina-
tion
eines
kleinen
Empfängers
Fahrregler und Servo in Normalgröße Wird empfohlen).
*Lesen
und befolgen Sie die der RC-Einheit beiliegende
Anleitung.
STOMQUELLE
Für diesen Bausatz benötigt man den Tamiya 7.2V
Batterie. Den Akku gemäß Anweisung aufladen.
ENSEMBLE
DE RADIOCOMMANDE
Pour piloter ce modéle, nous vous suggérons d'employer
un ensemble
de radiocommande
variateur de vitesse électronique (récepteur et variateur de
taille mini et servo de taille standard recommandés).
*Lire
et suivre Ies instructions
foumies
RIC.
ALIMENTATION
Le moteur qui équipe ce modåle peut åtre alimenté par un
pack d'accus Tamiya 7,2V. Charger le pack selon Ies
indications du manuel du pack et du chargeur.
TOOLS
RECOMMENDED
BENÖTIGTE WERKZEUGE
OUTILLAGE
+ Screwdriver (large)
+ Schraubenzieher (groß)
Tournevis + (grand)
Side cutters
Soitenschneider
Pinces coupantes
Modeling knife
Modellbaumesser
Couteau
de modéliste
Tamiya EXPECGT-12-channel RIC system
Tamiya EXPECGT-12-Kanal RIC System
Ensemble RIC Tamiya EXPEC GT-1 2 voies
(*ESCBXL..5
ESC (FETTYY)
12—-15m
2-channel RIC unit with electronic speed controller
2-Kanal RC-Einheit mit elektronischem Fahregler
Ensemble RIC 2 voies avec variateur électronique
30mm and below
of
speed
controller
and
Tamiya 7.2Vbattery and compatible charger
Tamiya 7,2VBatterie und Geeignetes Ladegeråt
Batterie Tamiya 7,2Vet chargeur compatible
RC-Einheit
mit einem
mit
elektronischem
«eøecz»
AVAILABLE
This kit does not include tires, tire inserts, motor
2 voies standard
avec
and pinion gear (0.4 module).
SEPARAT ERHÄLTLICH
Dieser
avec I'ensemble
Schaumgummi-Reifeneinlagen,
(0,4 Module).
DISPONIBLE
Ce kit n'inclut pas le pneu, l'inserts de pneu, le
moteur et le pignon (0.4 module).
Long nose pliers
Flachzange
Pinces å becs longs
Scissors
Schere
Lime
Pinzette
Précelles
/ ESC (FETT")
SEPARATELY
Baukasten
enthält
keinen
Reifen,
Motor und Ritzel
SEPAREMENT
2
)
*Small
size ESC and receiver are recommended.
*Fahrregler
und Empfänger kleiner Größe
werden empfohlen.
*Réceptour et variatour électronique de petite
taille
recommandés.
BODY
SHELL
Body
shell
is not
included
in kit.
separately
sold Tamiya 1/10 scale R/C polycar-
bonate body parts set (TA03, 04, 05, TL01, TB01,
02, TTOI).
KAROSSERIE
Dieser Baukasten enthält koine Karosserie. Tamiya
Lexan Karosserieset
MaBstab
erhältlich (TA03, 04, 05, TL01, TBOI, 02, TTOI).
CARROSSERIE
Ce kit n'inclut pas la carrosserie. Se procurer
séparément une carrosserie polycarbonate
1:10 TAMIYA (TA03. 04, 05, TLOI, TB01, 02, TTOI).
(5<-FFB)
Instant
cement
Sekundenkleber
Collo rapide
Liquid thread lock (mid strength)
Schrauben-Sicherungs-Flüssigkeit(mitt'ere Haftkraft)
Liquide frein-filet (accroche moyenne)
Synthetic rubber cement
SynthetischenKIeber
Colle Cyanolite
soft cloth. caliper, and E-ring tool will also assist in
construction.
*Ein weiches Tuch, eine Schieblehre und ein E-Ring-
Werkzeug
sind beim Zusammenbau
hitfreich.
tissu doux, un pied å coulisse et un outil
peuvent atre utiles pour
montage.
49491 TA05-lFS R Chassis Kit (11054514)
6
Purchase
1/10 separat
érhelle
circlips