Coffee Offset Correction; Enable Fast Heating - Profitec Drive Bedienungsanleitung

10.4.7 Coffee Offset Correction

The machine
External conditions can cause the water to cool down slightly on its way from
the boiler to the brew group. To compensate for this temperature loss, you
have the option to set the offset at a value of between -10°C and +10°C via the
menu. The setting +2°C is activated by default.

10.4.8 Enable Fast Heating

After the machine is switched on, it heats up to the preset brew temperature.
This can take 30 to 35 minutes, depending on the ambient temperature. The
"Enable Fast Heating" function serves to overheat the machine within a short
space of time in order to heat the brew group and reach the brew temperature
faster.
EN - 146
is designed
1. Open the main menu.
2. Select and open the "Coffee Offset
Correction" submenu.
3. Select the setting.
1. Open the main menu.
2. Select and open the "Enable Fast Heating"
submenu.
for optimal espresso preparation.
DRIVE_BA_V2.0