Profitec DRIVE Bedienungsanleitung Seite 136

10.2 Navigation in the menu
It is possible to navigate and change settings using the two navigation
buttons.
10.2.1 Opening the main menu
1. Press and hold the left-hand
3 seconds.
The main menu opens and the "Brew Temperature" icon appears on the
9
display.
10.2.2 Selecting and opening submenus
1. In the main menu, repeatedly press the left-hand
until the desired submenu is displayed.
2. Press the right-hand
The selected submenu opens and the corresponding submenu settings
9
are shown on the display.
10.2.3 Changing settings
1. In the submenu, repeatedly press the left-hand
navigation button until the desired setting is displayed.
2. Wait for 5 seconds.
The selected setting is automatically applied and the display returns to
9
the higher menu level. If no input has been made after several seconds,
the menu automatically closes and the current brew temperature and, if
activated, the steam temperature are shown on the display.
DRIVE_BA_V2.0
Sleep icon to announce ECO mode (see Chapter
9.1.4, „ECO mode")
Water tank icon
Water needs to be topped up (see Chapter 9.5, „Fill-
ing the water tank with water"), or
Water tank not correctly installed (see Chapter 11.5.1,
„Ausrichtung des Wassertanks")
Refill icon (see Chapter 9.5, „Filling the water tank
with water")
right-hand
navigation button.
navigation button for
navigation button
or right-hand
EN - 135