Profitec DRIVE Bedienungsanleitung Seite 144

10.4.4 Timer Enable
To be able to use the programmed switch-on and switch-off times, the timer
function must be activated ("ON"). If the timer function is not activated ("OFF"),
the machine ignores the programmed switch-on and switch-off times. In
this case, the machine uses the time set for ECO mode for automatically
switching off the heating function. When the timer function is deactivated,
the programmed switch-on and switch-off times are preserved and can be
reactivated at any time. The timer function is activated and deactivated as
follows:
DRIVE_BA_V2.0
The display for the day of the week
¾
appears.
3. Set the desired day of the week using the
left-hand button
right-hand button .
The display with the switch-on and
¾
switch-off times appears.
4. Press the right-hand button .
The hour display for the first switch-on
¾
time flashes.
5. Set the hours using the left-hand button
and confirm using the right-hand button
.
The minute display for the first switch-on
¾
time flashes.
6. Set the minutes using the left-hand
button and confirm using the right-hand
button .
The hour display for the first switch-off
¾
time flashes.
7. Set the hours using the left-hand button
and confirm using the right-hand button
.
The minute display for the first switch-off
¾
time flashes.
8. Set the minutes using the left-hand
button and confirm using the right-hand
button .
9. The second switch-on and switch-off
times are set in the same way.
and confirm using the
EN - 143