Ukca-Kennzeichnung; Ukca-Konformitätserklärung; Fcc Rules (Usa) - Siemens Client Simatic Ipc Rc-545A Betriebsanleitung

11.1.4

UKCA-Kennzeichnung

Das Gerät entspricht den designierten Britischen Standards (BS) für elektrische Geräte, die in
der offiziellen konsolidierten Liste der britischen Regierung veröffentlicht wurden. Das Gerät
erfüllt die Anforderungen und Schutzziele der folgenden Vorschriften und zugehörigen
Ergänzungen:
• S.I. 2016 No. 1091
Electromagnetic Compatibility Regulations 2016 (S.I. 2016 No. 1091), and related
amendments
• S.I. 2012 No. 3032
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012 (S.I. 2012 No. 3032), and related amendments
• S.I. 2016 No. 1101
The Electrical Equipment (Safety) Regulations 2016 (S.I. 2016 No. 1101), and related
amendments
UKCA-Konformitätserklärung
Die zugehörige Konformitätserklärung ist im Internet unter folgender Adresse verfügbar:
• EU/UK-Declaration of Conformity for SIMATIC IPC
(https://support.industry.siemens.com/cs/ww/en/view/37369031)
11.1.5

FCC Rules (USA)

Federal Communi-
cations Commissi-
on
Radio Frequency
Interference
Statement
Shielded Cables
Modifications
Conditions of
Operations
Client SIMATIC IPC RC-545A
Betriebsanleitung, 03/2024, A5E53092298-AA
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is likely to cause harm-
ful interference in which case the user will be required to correct the interference
at his own expense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Normen und Zulassungen
11.1 Zertifikate und Zulassungen
145