2. KIT CONTENTS
A
B
D
E
A - 1 worm gear with 6 m of cables
B - 1 worm gear with 2 m of cables
C - 4 mounting brackets + 1 set of keys (for disengaging the gate)
D - 1 control box.
E - 2 four-channel remote controls
F - 1 flashing beacon (to be positioned on post so as to be visible from street).
G - 1 set of photocells (position 40 cm max. from bottom of post).
H - 1 lighting module (required to light the gate's path of movement). This "lighting system" module
must be obligatorily installed in a CLASS II, IP44 electrical cabinet.
I - 1 operator control relay powered by a 12 V supply from a door phone (connect the red and black
wires on the 12 V door phone control and the 2 white wires on the operator board's auxiliary
control).
J -
2 Sets of internal stops (modular), 11 similar and 1 smaller per set.
options (not supplied):
F
G
8GB
WEAT V2 N - V1
C
H
I
J