Herunterladen Diese Seite drucken

Truma Mover smart M RS1 Einbauanleitung Seite 21

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Mover smart M RS1
Fig� 1
U-profile
a
Fig� 2
a
max� 20 mm
a
b
c
Fig� 3
a
min� 2,8 mm
b
min� 25 mm
c
min� 50 mm / max� 180 mm
d
min� 120 mm / max� 2000 mm
e
min� 35 mm
f
max� 20 mm
5.3
Measuring the frame height
A frame height of at least 170 mm is required at the lev-
el of the wheel hub / tyre centre in the range of 350 mm
from the outer edge of the tyre�
Fig� 4
a
350 mm
b
min� 170 mm
60040-00463 ∙ 00 ∙ 09/2023
a
f
e
d
a
5.4
Determining the installation type
and required special accessories
The figures showing the special accessories are for il-
lustration purposes only� For detailed information on the
installation, see the assembly instructions�
5.4.1 Standard installation
Standard installation is used with a U-profile or L-profile
chassis and a frame height of at least 170 mm�
No special accessories are required for the standard
installation�
5.4.2 Height compensation with spacer sets
Frame height >110 mm and <170 mm
Installation on U-profile or L-profile chassis with a frame
height greater than 110 mm and less than 170 mm
requires height compensation�
If the frame height is less than 110 mm, installation
is not possible without further ado (see low chassis
kit)�
For a frame height of 110 mm to less than 140 mm,
the spacer kit 60 mm must be used for compensa-
tion�
For a frame height of 140 mm to less than 170 mm,
the spacer kit 30 mm must be used for compensa-
tion�
For a frame height of 170 mm or more, no spacer kit
needs to be used� Observe ground clearance�
Frame height
[mm]
���
-
109
110
-
139
140
-
169
170
-
���
Spacer kit 30 mm
The spacer kit is used for height compensation of
30 mm for standard L-profile or U-profile chassis�
For compensating for height on caravans with a
frame height of 140 mm to less than 170 mm�
Can be installed in front of or behind the axle�
The spacer kit is also used for height compensation
when installing under the entrance step�
Part No� 60030-95000
b
Fig� 5
Preparing for installation
Spacer kit
Installation
[mm]
possible
-
no
60
yes
30
yes
-
yes
EN
21

Werbung

loading