Truma Mover smart M RS1 Einbauanleitung Seite 22

Preparing for installation
Fig� 6
a
Fig� 7
a 30 mm
Spacer kit 60 mm
The spacer kit is used for height compensation of
60 mm for standard L-profile or U-profile chassis�
For compensating for height on caravans with a
•
frame height of 110 mm to less than 140 mm�
Can be installed in front of or behind the axle�
•
The spacer kit is also used for height compensation
•
when installing under the entrance step�
Part No� 60030-95100
•
Fig� 8
Fig� 9
a
Fig� 10
22 EN
a 60 mm
5.4.3 Height compensation with low chassis kits
 If the low chassis kit is used in Germany, acceptance
by a vehicle expert is required�
Frame height less than 110 mm
If the chassis has a frame height of less than

110 mm, fit a low chassis kit to compensate�
Low chassis kit
Mounting plates for height compensation on standard
L-profile or U-profile chassis and/or for bridging struts
with the standard mounting system�
For compensating for height on caravans with a
•
frame height of less than 110 mm and/or for bridg-
ing struts�
Can be installed in front of or behind the axle�
•
Part No� 60010-64900
•
Fig� 11
Fig� 12
Fig� 13
Low chassis kit, short
Mounting plates for height compensation on standard
L-profile or U-profile chassis�
For compensating for height on caravans with a
•
frame height of less than 110 mm and for greater
ground clearance�
Can be installed in front of or behind the axle�
•
Part No� 60030-37600
•
Mover smart M RS1
60040-00463 ∙ 00 ∙ 09/2023