Seca mBCA 555 Bedienungsanleitung Seite 187

11 SERVICING
11.1 Verified scales
CAUTION!
Faulty measurements as a result of verification being performed poorly
or not at all
► Have verification performed only by authorized persons.
► Always have verification performed if one or more quality seals are
damaged.
seca recommends having your device serviced prior to verification.
CAUTION!
Faulty measurements as a result of poor servicing
► Have servicing and repairs carried out exclusively by seca Service
or an authorized service partner.
► You can find a service partner in your vicinity at www.seca.com or
by emailing service@seca.com.
Have authorized persons perform verification in line with national legal regula-
tions.
Verification is necessary whenever one or more quality seals are damaged or the
contents of the verification counter no longer match the number on the applica-
ble verification counter seal. If quality seals are damaged, contact seca Service
directly.
Verifications may only be performed by authorized agencies. To guarantee this,
the scale is equipped with a verification counter which records each change in
verification-related data. The GAL value used by the device can also be read off.
If you want to check whether the scale has been properly verified, proceed as
follows:
1. Press the key.
ð The
menu is displayed.
Settings
2. Press .
About
3. Press the or key until the
4. Read off the GAL value (figure shows example values).
menu item is displayed.
Verification
English
Servicing • 187