Seca mBCA 555 Bedienungsanleitung Seite 185

Interrupting and restoring the power supply (power supply operation)
4. Press the item.
Restart
5. Press the symbol.
ð The device restarts.
6. Wait until the main screen is displayed again.
ð The device is ready for operation.
If restarting using the display is unsuccessful, you can briefly interrupt the power
supply to the device:
1. Make sure that there is no load on the weighing platform.
2. Disconnect the power supply unit from the power supply socket.
3. Wait about a minute.
ca. 60 sec.
4. Plug the power supply unit back into the socket.
ð The device and the multifunctional display switch on automatically.
ð The device is ready for operation.
English
Troubleshooting • 185