Seca mBCA 555 Bedienungsanleitung Seite 150

7.2 Measuring
Activating Autohold function
150 • seca 555/554/552; seca 550/549; seca 257/256
Device mode
Basic
Advanced
Expert
Service
If you activate the
Autohold
Hold function manually for each individual measurement.
On devices with a measuring rod, the setting also applies to the display of
height.
NOTE
This function is activated at the factory on some models. The function
can be deactivated.
1. Press the key.
ð The
menu is displayed.
Settings
2. Press the or key until the
3. Select the desired setting:
– Function activated
– Function deactivated
4. To exit the menu, press the
Function available
function, it is no longer necessary to activate the
menu item is displayed.
Autohold
key.
–
•
•
•