Seca mBCA 555 Bedienungsanleitung Seite 137

Permanently displaying the weight (Hold)
NOTE
The maximum weight which can be displayed is reduced by the
weight of the objects which have been tared.
Device mode
Basic
Advanced
Expert
Service
When the Hold function is activated, weight continues to be displayed after the
weight has been removed from the scale. This enables you to attend to the pa-
tient before recording the weight.
✓
There is no load on the scale.
1. Ask the patient to step onto the scale.
2. Press the Hold key.
3. Wait until the weight has stopped flashing.
ð The message
Hold
4. To deactivate the function, press the
ð The
message is no longer displayed.
Hold
Function available
appears.
key.
Hold
English
–
•
•
•
Operation • 137