Seca mBCA 555 Bedienungsanleitung Seite 148

Mode Functions
• Measurement functions:
– Perform a measurement
– Read off results
– Use additional functions
Expert
• Menu:
– Configure the device
– Configure network connection
• Measurement functions:
– Perform a measurement
– Read off results
– Use additional functions
Service
• Menu:
– Configure the device
– Configure network connection
– Additional service functions
Calling up/exiting a menu
148 • seca 555/554/552; seca 550/549; seca 257/256
Use
• Guided measure-
ments
• Configure the device
• Network connection
Service
To select a device mode, proceed as follows:
1. Press and hold the
appears.
ð The current device mode is displayed.
2. Press the desired device mode.
ð The function is active.
3. Press the key in the header.
ð The main screen is displayed.
1. To call up the menu, press the
ð The
Settings menu is displayed.
2. To exit the menu, press the
ð The main screen is displayed.
NOTE
The setting options available in the menu depend on the product vari-
ant/combination of products being used. The menu of your device
may have a smaller scope than that shown in these instructions for
use.
Recommended user group
• Hospital personnel
• Hospital technicians
• IT administrators
Authorized service techni-
cians
key (approx. 5 sec.) until the
key.
key.
menu
Device mode