Seca mBCA 555 Bedienungsanleitung Seite 131

Activating the multifunctional display (network connection)
1. Press the multifunctional display to activate it.
ð The main screen is displayed.
2. Ask the patient to step onto the weighing platform.
3. Complete the measurement as described in the relevant sections of these
instructions for use.
The multifunctional display will switch to standby mode
time, page 158) after a set time period. The following screensaver is displayed
with a network connection:
1. Press the multifunctional display to activate it.
ð The main screen is displayed.
2. Scan your ID and the ID of the patient.
NOTE
If you press the
Continue as guest
ment immediately and scan the IDs later.
3. Ask the patient to step onto the weighing platform.
4. Complete the measurement as described in the relevant sections of these
instructions for use.
Screensaver for
stand-alone operation
(è Setting standby
Screensaver for
network connection
key, you can start the measure-
English
Operation • 131