clage ISX Gebrauchs- Und Montageanleitung Seite 49

5. CLAGE app "Smart Control"
Using the app
The CLAGE Smart Control app provides convenient access to all ISX functions via your
smartphone / tablet.
Note: Modbus and WLAN functions are hidden when connected via Bluetooth.
Temperature display
The coloured scale ring is filled up as the temperature setting increases and shows a
colour gradient from blue at low temperatures to red at high temperatures. In addi-
tion, the target temperature is displayed in °C as a figure in the middle of the display.
Temperature setting
The desired temperature can be selected by tapping on
ting or by dragging along the coloured scale ring for a quick selection within a range
of 20 °C to 60 °C. Tapping
comfort range between 35 and 43 °C by 0.5 °C. If the temperature is set below 20 °C,
the symbol appears in the temperature display and the appliance switches off the
heating function.
User selection
Up to eight user profiles can be created. Every user has the option to save his desired
temperatures for the different uses in a profile. The user profiles can be selected by tap-
ping on the profile image and the temperatures saved in the profile are set (to create
profile, see Section "User").
Applications
Preset applications can be selected here. Simply tap on the desired symbol.
The temperatures set at the factory (
bath = 40 °C, hot water = 48 °C) can be changed for each application via the
temperature setting. If you touch the temperature value in the temperature display or
the application symbol for 3 seconds, the temperature is saved for the selected applica-
tion. The temperature display flashes once for confirmation. Application temperatures
saved in the user profile can be called up at any time by tapping on the corresponding
symbol.
Status display, top
Control lock active (PIN)
The inlet temperature exceeds the target value (appliance does not heat up)
Wi-fi is activated
Status display, bottom
Display area for functions which require confirmation from the user or which are of
great significance.
Eco active: The appliance operates in an energy-efficient range. This is indicated
by the ECO symbol.
Maintenance: Tap the symbol to open a status message with additional informa-
tion.
Maximum temperature reached: The temperature cannot be increased any fur-
ther since the set temperature limit has been reached. The temperature limit
can be changed in the main menu under "Settings".
49
or once changes the temperature by 1 °C, in the
handwash = 35 °C,
CLAGE
and for the fine set-
shower = 38 °C,
EN