clage ISX Gebrauchs- Und Montageanleitung Seite 45

4. Remote control
Key lock
The key lock can be activated/deactivated by simultaneously pressing and holding
the left and right sensor keys. As long as the key lock is active, all symbols are shown
hatched (see fig. B14).
User
Each of the four user profiles can be provided with their own profile image. This image
appears in the main screen.
In the main screen, every user can set up and save his own desired temperatures for
the different applications.
Savings
The flow rate can be set and the maximum temperature limited in this menu. The costs
for electricity and water for the statistical data can also be defined.
Setting options for the flow rate:
"OFF" no flow rate limitation (motor valve deactivated)
"AUTO" automatic adjustment, the flow is limited if this is necessary to reach the
desired temperature
"ECO" flow rate limitation to max. 8.0 l/min
e.g. "9.0" limitation to a freely selectable value between 4.5 and 14 l/min
Temperature Limit: The temperature limit can be activated / deactivated in this menu
and the maximum warm water temperature can be limited to a desired value within the
temperature setting range.
Note: If the instantaneous water heater supplies a shower, then the maximum tem-
perature was limited during the installation of the appliance and can not be changed.
Electricity price (currency/kWh): Specify the electricity price of your own electricity
supplier.
Water price (currency/m³): Specify the water price of your own water supplier.
Device Information
The current status and appliance data are listed here. Use the sensor keys to scroll
through the different information values.
Top-up heating
When operating with preheated water (e.g. with solar systems), you must ensure that
the inlet temperature does not exceed 70 °C.
If the inlet temperature exceeds the setpoint, the appliance is not providing any out-
put. The symbol is displayed in the main screen
45
CLAGE
EN