Werbung
1-6-39. T Soft Brake Replacement
1. Remove the T soft brake spring (1).
2. Remove the claw (A) on the T soft brake (2) from the
mechanical deck and remove the T soft brake (2).
3. After replacing the T soft brake (2), mount the parts in
the reverse order of removal.
Note:
* When mounting the T soft brake spring (1), take care
not to deform the hook (B).
* Take care not to touch the surface (C) on the brake
pad.
T soft brake spring (1)
T soft brake (2
Fig. 6-39-1
1-6-40. Drive Lever Replacement
1. Remove the top bracket. (Refer to item "1-6-1. Top
Bracket Replacement".)
2. Remove the cassette holder assembly. (Refer to item
"1-6-2. Cassette Holder Assembly Replacement")
3, Remove the drive arm assembly. (Refer to item "1 -6-
5. Drive Arm Assembly Replacement".)
4, Remove the cam slider. (Refer to item "1-6-41. Cam
Slider Replacement".)
5. Remove the Loading Drive Assembly. (Refer to item
"1-6-29, Loading Drive Assembly Replacement.")
6. Remove the drive lever (1).
2-31
7. After replacing the drive lever (1), mount the parts in
the reverse order of removal.
Note:
¢ Be sure to align the phase of the cam gear (2). (Refer
to item 1-6-41. Cam Slider Replacement".)
Mount the drive lever (1) so that it is positioned
between the mark (A) on the mechanical deck and the
outsert (B).
Apply grease to the surface between the mark (C) on
the mechanical deck and the drive lever shaft (D).
Hole for phase matching
Drive lever (1)
Hole for phase
matching
Apply grease:
Appy grease
Marking (C)
Fig. 6-40-1
Werbung
