Werbung
1-6-24. S,T Loading Assembly Replacement
1. Remove the mechanical deck assembly from the main
PC board.
Set the mechanical position to the F/L out position
(front side). Turn over the mechanical deck.
. Remove the loading slider assembly. (Refer to item
"1-6-25. Loading Slider Assembly Replacement".)
T loading hole (B)
we Black
White
S loading hole (A)
T slider assembly (4)
(F/L out position)
sal
I
T loading
assembly (2)
aS
S loading
S slider assembly (3)
assembly (1)
(F/L out position)
Fig. 6-24-1
Remove the S, T loading assemblies (1), (2).
Insert the S, T slider assemblies (3), (4) along the
cutout of the S, T loading holes (A) and (B) on the
mechanical deck and set the S, T slider assemblies (3),
(4) to the loading position (rear side).
Insert the T loading assembly (2) to the post (C) on
the T slider assembly (4) and the post (D) on the
mechanical deck. And insert the S loading assembly
(1) to the post (E) on the S slider assembly (3) and the
post (F) on the mechanical deck.
2-22
Post (C)
T slider assembly (4)
(Loading position)
Citai
S loading assembly (1)
T loading
hole eB
/
Cutout
S slider assembly (3)
(Loading position)
S loading hole (A)
Fig. 6-24-2
Note:
* Align the phases of the A marks on the S, T loading
gear (1), (2).
7. Set the S, T slider assemblies (3), (4) to the F/L out
position.
T loading
gear (2)
S loading
gear (1)
Fig. 6-24-3
Werbung
