Werbung
1-6-37. S, T Main Brake Assembly Replacement
1. Remove the mechanical deck from the main PC board
and turn the mechanical deck upside down.
2. When replacing the T main brake assembly (2), first
remove the idle kick lever (3). (Refer to item "1-6-34.
Idle Arm Assembly Replacement".)
3. Remove the tension spring (4).
4. Remove the claws on the S, T main brakes (1), (2)
from the mechanical deck lifting the S, T main brakes
(1), (2) upward.
5. After replacing the S, T Main brake assemblies (1),
(2), mount the parts in the reverse order of removal.
Note:
¢
When mounting the S, T main brake assemblies (1),
(2) take care that both ends of the S, T main brakes
(1), (2), do not touch the gear of the reel table.
Idle kick lever (3)
T main
Tension
spring (4
=
S main brake (1)
Fig. 6-37-1
2-30
1-6-38. S Soft Brake Replacement
1. Remove the cam slider. (Refer to item "1-6-41. Cam
Slider Replacement.")
2. Remove the drive arm assembly. (Refer to item "1-6-
5. Drive Arm Assembly Replacement"'.)
3. Remove the S soft brake spring (1).
4. Remove the S soft brake (2) after removing the claw
(A) on the S soft brake from the mechanical deck.
Note:
* When mounting the S soft brake spring (1), take care
not to deform the hook (B).
¢ When mounting the S soft brake (2), take care of the
band brake (3).
S soft brake spring (1)
Claw (A)
S reel table
assembly
p
REC-inhibiting
lever
Band
brake (3)
Hook
Fig. 6-38-1
Werbung
