Werbung
Pinch assembly (1)
))
Pinch drive
assembly (3)
Projection (A)
Apply
grease
Phase alighning !
siti
hole (C) !
Pinch lever
assembly (4)
Phase aligning
hole (B)
Pinch post (2)
Apply grease here.
Fig. 6-21-1
Note:
¢ For the removal and assembling of the loading drive
assembly, refer to item 1-6-29.
¢ When inserting the pinch assembly (1) into the pinch
post (2), insert it so that the pinch drive post (D) enters
the groove (E) inside the cam gear.
¢
Take care not to touch the surface of the pinch roller
and the grease is not stained on it.
*
Be sure to apply grease to the surface of the bar-ring
on the pinch lever assembly (4) and the pinch post (2)
on the mechanical deck.
1-6-22. No. 9 Guide Lever Assembly
Replacement
1.
Remove the loading drive assembly. (Refer to item "1-
6-29, Loading Drive Assembly Replacement.)
2.
Remove the drive lever. (Refer to item "1-6-40. Drive
Lever Replacement")
3. Remove the pinch assembly. (Refer to item "1-6-21.
Pinch Roller Assembly Replacement'.)
4. Remove the ACE head assembly. (Refer to item "1-6-
16. ACE Head Assembly Replacement")
5. Remove the cam gear (2) from the cam gear post (1).
6. Remove the T soft brake spring (3).
7. Remove the No. 9 guide lever assembly (4) lifting the
No. 9 guide lever assembly upward from the No. 9
guide post (5).
8. After replacing, mount the parts in the reverse order of
removal.
9. After completion of the replacement, perform the tape
transport adjustment.
Note:
¢ When mounting the No. 9 guide lever assembly (4),
confirm that (A) side of the No. 9 guide lever assem-
bly (4) touches the capstan motor housing portion.
After inserting the No. 9 guide lever assembly (4) into
the No. 9 guide post (5), confirm that the lower
projection of the No. 9 guide lever assembly (4)
touches to the upper surface of the mechanical deck.
Take care that the grease is not stained on the No. 9
guide post of the No. 9 guide lever assembly (4).
¢ Be sure to apply grease to the No. 9 guide post (5).
Drive lever
Cam gear (2)
(A) side of No. 9
guide lever
No. 9 guide lever
assembly (4)
No. 9 guide
Pinch
assembly
Lower side projection |
of No. 9 guide lever
Cam gear
post (1)
Drive lever
post
T soft brake spring (3)
No. 9 guide post (5
~~
Pinch post
Apply grease here
T soft brake lever
Capstan motor housing
assembly
Fig. 6-22-1
Werbung
