Werbung
1-6-6. Cam Lever Replacement
1. Remove the top bracket. (Refer to item "1-6-1. Top -
Bracket Replacement".)
2. Remove the cassette holder assembly. (Refer to item
"1-6-2. Cassette Holder Assembly Replacement".)
3. Remove the cam slider. (Refer to item "1-6-41. Cam
Slider Replacement".)
4. Remove the loading drive assembly. (Refer to item "1-
6-29. Loading Drive Assembly Replacement'.)
5. Remove the drive lever. (Refer to item "1-6-40. Drive
Lever Replacement".)
6. Remove the pinch roller assembly. (Refer to item "'1-- -
6-21. Pinch Roller Assembly Replacement".)
7. Remove the cam gear. (Refer to item "1-6-31. Cam
Gea Replacement".)
8. Move the cam lever (1) until it stops in the direction
shown by the arrow (A). Pull out the cam lever (1)
lifting up straightly at the position where the cam lever
(1) stops.
9. Apply grease to the portions of bosses (A) to (C) ona
new cam lever.
Note:
¢ Confirm that the boss (A) on the cam lever (1) is
inserted into the hole on the F/L drive slider (2).
* After inserting the cam lever (1), confirm that the cam
lever (1) moves smoothly.
10. Replace the cam lever in the reverse order of removal.
Cam lever (1)
Boss (A)
(Apply grease.)
F/L drive
slider (2)
Boss (C) (Apply grease.)
Boss (B) (Apply grease.)
Fig. 6-6-1
1-6-7. F/L Drive Slider Replacement
1. Remove the top bracket. (Refer to item '*1-6-1. Top
Bracket Replacement".)
2. Remove the cassette holder assembly. (Refer to item
"1-6-2. Cassette Holder Assembly Replacement".)
3. Remove the cam slider. (Refer to item "1-6-41. Cam
Slider Replacement".)
4. Remove the loading drive assembly. (Refer to item "1-
6-29. Loading Drive Assembly Replacement".)
5. Remove the drive lever. (Refer to item "1-6-40. Drive
Lever Replacement".)
6. Remove the pinch roller assembly. (Refer to item "1 -
6-21. Pinch Roller Assembly Replacement".)
7. Remove the cam gear. (Refer to item "1-6-31. Cam
Gear Replacement".)
8. Remove the cam lever. (Refer to item "!-6-6. Cam
Lever Replacement".)
9. Remove the drive lever gear. (Refer to item "1-6-4.
Drive Lever Gear Replacement".)
10. Push the F/L drive slider (1) in the direction shown by
the arrow (A) and slide it. Furthermore, pull out it to
the front side lifting it in the direction shown by the
arrow (B).
11. Apply grease to the shaded parts (a) to (d) on a new F/
L drive slider (1).
Note:
For the phase alignment of the drive lever gear, refer to
item "1-6-4. Drive Lever Gear Replacement".
12. Replace the F/L drive slider (1) in the reverse order of
removal.
Note:
After completion of the replacement, confirm that the F/L
drive slider (1) moves smoothly.
F/L drive slider (1)
Fig. 6-7-1
Werbung
