Optimum 3338180 Betriebsanleitung Seite 75

This information about the noise emission should, however, allow the operator of the machine
to more easily evaluate the hazards and risks.
CAUTION!
Depending on the overall noise exposure and the basic threshold values, machine
operators must wear appropriate hearing protection.
We generally recommend the use of noise and ear protection.
2.12 Tools and tool holding fixtures
CAUTION !
When using tools with larger diameters or at higher speeds!
The balancing of the tools has to amount to
0 - 6000 rpm - G 6.3

from a speed of 6000 rpm - G 2.5

according to DIN / ISO 1940.
Version 1.0.5 - 2021-01-29 Translation of original instruction
MH50G│MH50V EN
75