Optimum 3338180 Betriebsanleitung Seite 65


Safety devices on page 67
1.6 Qualification
1.6.1 Private Users
The MH50G milling machine is also used in the private domain. The acumen of people in the
private sector with training in metal working was taken into consideration for creating this opera-
tion manual. Vocational training or further instruction in a metal working profession is a prereq-
uisite for safe operation of the machine. It is essential that the private user is aware of the
dangers involved in operating this machine. We recommend visiting a training course in the
operation of milling machines. Your specialist dealer can offer you an appropriate training
course. These courses are also offered by adult education centres in Germany.
1.6.2 Obligations of the User
The user must
have read and understood the operating manual,

be familiar with all safety devices and regulations,

be able to operate the milling machine.

1.6.3 Craftsman or industrial use
This manual is addressed to
the operating companies,

the operators,

the maintenance personnel.

Consequently, the warning notes refer both to the use of the milling machine and to its mainte-
nance.
WARNING!
Always isolate the milling machine from the electrical power supply. This will prevent it from
being used by unauthorized persons. The qualifications of the personnel for the different tasks
are mentioned below:
Operator
The operator has been instructed by the operating company regarding the assigned tasks and
possible risks in case of improper behaviour. Any tasks which need to be performed beyond the
operation in standard mode must only be performed by the operator, if so indicated in these
instructions and if the operator has been expressively commissioned by the operating com-
pany.
Qualified electrician
With professional training, knowledge and experience as well as knowledge of respective
standards and regulations, qualified electricians are able to perform work on the electrical sys-
tem and recognise and avoid any possible dangers. Qualified electricians have been specially
trained for the working environment, in which they are working and know the relevant standards
and regulations.
Qualified personnel
Due to their professional training, knowledge and experience as well as knowledge of relevant
regulations, qualified personnel are able to perform the assigned tasks and to independently
recognise and avoid any possible dangers.
Version 1.0.5 - 2021-01-29 Translation of original instruction
MH50G│MH50V EN
65