Optimum 3338180 Betriebsanleitung Seite 106

EC Declaration of Conformity
according to Machinery directive 2006/42/EC, Annex II 1.A
The manufacturer / distributor
hereby declares that the following product
Product designation:
Type designation:
fulfills all the relevant provisions of the directive specified above and the additionally applied directives (in
the following) - including the changes which applied at the time of the declaration.
Description:
Hand-controlled milling machine
The following additional EU Directives have been applied:
EMC Directive 2014/30/EU ; Restriction of the use of certain hazardous substances in electrical and elec-
tronic equipment 2015/863/EU
The following harmonized standards were applied:
EN 13128:2001+A2:2009/AC:2010 Safety of machine tools - Milling machines (including boring machines)
EN 60204-1:2014 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN 13849-1:2015 - Safety of machinery - Safety related parts of controls - Part 1: General design principles
EN 13849-2:2012 - Safety of machinery - Safety related parts of controls - Part 2: Validation
EN ISO 12100:2013 - Safety of machinery - General principles for design - Risk assessment and risk
reduction
EN 50370-2 - Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2:
Immunity
EN 55011:2016 + A1:2017 - Industrial, scientific and medical equipment - Radio-frequency disturbance
characteristics - Limits and methods of measurement - class A
EN 61000-3-2:2015-03 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current
emissions (equipment input current <= 16 A per phase)
EN 61000-3-3:2014-03 - Electromagnetic compatibility (EMC) - Part 3-3: Electromagnetic compatibility
(EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connec-
tion
Name and address of the person authorized to compile the technical file:
Kilian Stürmer, phone: +49 (0) 951 96555 - 800
Kilian Stürmer (CEO, General Manager)
Hallstadt, 2020-11-09
EN
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt, Germany
Hand-controlled milling machine
MH50V