Power Supply, On/Off - Knauer Smartline 2300 Benutzerhandbuch

10
Rear Panel of the Smartline RI Detector 2300/2400
Fig. 6
Table 3

Power Supply, ON/OFF

1
Rear view of the RI Detector 2300/2400
1
2
3
4
5
6
Functional elements on the rear panel
The RI Detector 2300/2400 is equipped with a modern switching power
supply. This power supply works in a range of 90 - 260 V AC and 47-
63 Hz. The instrument can be switched off and on again from the main
switch (on the back of the instrument) or the standby key.
Please note that the instrument is not completely switched off when
in standby-mode. Only with the main switch can the instrument be
completely switched off.
Preparing the RI Detector 2300/2400 for Operation
2 3
4
Analog outputs (1V, scalable)
RS-232 connector
Remote control connectors
Serial number
Main switch
Power connector
6
5